Testimonials

May I take a moment of your time to thank you for your service with the supply and installation of our Chiller. Your installer Stuart Nesbitt has done a fantastic job with a very professional service, and the chiller is working perfectly. He involved our team who use the machine to make sure all was acceptable to them and explained in detail the operating of the machine along with maintenance instructions. Great job well done!

Alec Grice, Lichtgitter (UK) Ltd

Recently purchased a chiller from yourselves to get us out of a sticky situation following a breakdown on our old machine. All staff we dealt with during the process were brilliant, very helpful, knowledgeable and responsive to all queries. In particular a special mention for Stuart (Service engineer), who guided us through some troubleshooting to get the new machine working at our end via a video call.

We will have no issue recommending your company in future

Brian & James, Redshift Laser Marking Ltd

The chiller is working as it should which means we can now run 2 furnaces together which has pleased the production guys! I have to thank you and your engineer Stuart for the sterling work in getting our chiller up and running in the time frame given, Stuart completed the task professionally and a is a credit to your company.

Steve Matthews, COLLINS AEROSPACE

We were having problems with contaminants in our system which were bypassing our previous filtration system and clogging up our heat exchanger, which was causing an inefficient cooling system, excessive maintenance, and downtime. We discussed a magnetic filtration solution, Summit [Process Cooling] did all the calculations and assured us this set up would work well in our system. The communication was good throughout, the install went smoothly, and all problems resolved. I would happily recommend Summit Systems for any process cooling needs and will continue to use them moving forward.

Anonymous

We were finding it impossible to maintain our mould temperature of 8°C using our current set up of a chiller and 2 TCU’s. Summit Chilled installed a Frigel dual zone Microgel combined unit and we are now maintaining a perfect 8°C mould temperature and have reduced our cycle time by 20%. We enjoy a great relationship with Summit Systems so look forward to working with Summit Chilled.

Patterson & Rothwell

A little while ago, one of our customers was experiencing major issues maintaining their cooling water temperatures of 40°C & 50ºC to the mould using 2 temperature control units. Summit Chilled assessed their process and decided to install a Frigel Firenze S.p.A. dual zone Turbogel. They are now maintaining a PERFECT cooling water temperature of 40°C & 50ºC. This has reduced the actual tool temperature by 23% and the final moulding temperature by 24%. They have also reduced cycle time by 10% as a result of the new installation.

Anonymous

Total Process Cooling have delivered several solutions to difficult projects that have been brought to their attention. These have involved process cooling and MRI cooling. When faced with technical and logistical deliveries, they have always delivered on time and with great professionalism. We are the largest Air Conditioning contractor in Northern Ireland and have experience of many suppliers. The service provided by Total Process Cooling is as good as it gets.

Ian McFerran

Thank you to the whole team at Total Process Cooling, from my initial conversation, comprehensive advice and the required specification was given. A prompt installation date was strictly adhered to by an efficient team on site. I have no hesitation to recommend Total Process Cooling to anyone.

Mark Wetherell, Wetherell Plastics

We were having problems with our previous supplier (poor communication, not fully resolving breakdowns). Situation culminated with a final break-down which ex-supplier were adamant unit needed complete replacement and was beyond repair. We took their word and decided to use Google to search for other suppliers to provide secondary quotes. After finding Total Process Cooling, they advised that the problem’s description sounded more like an inexpensive part replacement rather than entire unit. They visited the same day to diagnose and the following to fix (for fraction of replacement price). Our relationship built from there. Total Process Cooling are consistently on site within the same day (for breakdowns), certainly no more than next day. They now do our annual servicing and have just completed a major pipework replacement. Samuel Taylor Ltd would certainly recommend Total Process Cooling for all your Chiller needs.

James Cameron Samuel Taylor Ltd